URN: http://nbn-resolving.iq/urn:nbn:iq:1025-tjes.v25i47

Published: 2022-02-23

Articles

Application of Dynamic Cone Penetration Test to Gypseous Soils

Ahmed A. H. Al-Obaidi, Qudama A. A. Al-Ashoishi

1-5

PDF
DOI: https://doi.org/10.25130/tjes.25.4.01

The Effect of Pads Number and Their Tilt Angles on the Bearing Stiffness

Ibrahem Ali Muhsin

6-10

PDF
DOI: https://doi.org/10.25130/tjes.25.4.02

Optimum Building Wall Thickness under Actual Weather Conditions for Kirkuk City

Mousa M. Waes

11-15

PDF
DOI: https://doi.org/10.25130/tjes.25.04.03

Effects of Rice Husk Ash–Magnesium Oxide Addition on Wear Behavior of Aluminum Alloy Matrix Hybrid Composites

Abbas Y. Awad, Mohammed N. Ibrahim, Mohamed K. Hussein

16-23

PDF
DOI: https://doi.org/10.25130/tjes.25.4.04

Effect of Fluidized Bed Particle Size on Heat Transfer Coefficient at Different Operating Conditions

Ehsan Fadhil Abbas, Sarah Burhan Izat

24-29

PDF
DOI: https://doi.org/10.25130/tjes.25.4.05

Effecting of Steel Fibers and Fly Ash on the Properties of Concrete

Mazin B. Abdul-Rahman, Alya'a A. Ali, Amenah M. Younus

30-36

PDF
DOI: https://doi.org/10.25130/tjes.25.4.06

Flexural Behavior of Reinforced Concrete One-Way Slabs with Different Ratios of Lightweight Coarse Aggregate

Muyasser M. Jomaa’h, Shamsad Ahmed, Hussein M. Algburi

37-45

PDF
DOI: https://doi.org/10.25130/tjes.25.4.07

Effect of Colored Filters on PV Panels Temperature and Performance under Baghdad Meteorological Condition

Abdulmunem R. Abdulmunem, Abdullateef A. Jadallah, Hisham A. Hoshi, Mohammed H. Jabal

46-50

PDF
DOI: https://doi.org/10.25130/tjes.25.4.08

Tensile Strength, Micro-hardness and Microstructure of Friction-Stir-Welding AA6061-T4 Joints

Najeeb S. Abtan, Ataalah Hussain Jassim, Mustafa S. M. Al-Janabi

51-56

PDF
DOI: https://doi.org/10.25130/tjes.25.4.09

Control Techniques of Torque Ripple Minimization for Induction Motor

Thamir Hassan Atyia

57-63

PDF
DOI: https://doi.org/10.25130/tjes.25.4.10