Chemical Engineering

ASJC code: 1501

Field: Chemical Engineering (miscellaneous)

Subject Area: Physical Sciences

32 Items

  • Utilizing LPG as an Additive to Enhance the Properties of Iraqi Diesel Oil

    Davan Abdulqadir, Fakhri Hamdullah Ibraheem

    10-20

    DOI: https://doi.org/10.25130/tjes.30.2.2

  • Utilizing Hydrodynamic Cavitation with Variable Orifice Patterns for Textile Wastewater Treatment

    Pratima Gajbhiye, Vishalkumar U. Shah, Jigesh P. Mehta, Hitesh Panchal, Anand V. Metre

    33-42

    DOI: https://doi.org/10.25130/tjes.31.1.4

  • Utilization of CO2 in Flue Gas for Sodium Bicarbonate Production in a Bubble Column

    Zaid A. Abdel-Rahman, Zeyad A. Abdullah

    28-38

    DOI: https://doi.org/10.25130/tjes.26.2.05

  • Synthesis, Design and Evaluation of Innovative Combined Nano-Catalysts Supported on Activated Carbon Prepared from Apricot Shells

    Shymaa A. Hameed, Raja Ben Amar , Khaleel I. Hamad, Aysar T. Jarullah

    113-123

    DOI: https://doi.org/10.25130/tjes.30.3.12

  • Removal of Sulfate and Iron from a Water Solution Using a New Flow Pattern in an Electrocoagulation Reactor

    Shahad F. AlRubaye, Naseer A. Al Haboubi, Hussein A. Al-Amili

    205-218

    DOI: https://doi.org/10.25130/tjes.31.2.20

  • Removal of Monovalent and Divalent Cations from Brine Water by Electrodialysis Using Modified Polyethersulfone Membranes

    Zainab A. Khalaf, Sarah S. Mohammed Jawad

    23-32

    DOI: https://doi.org/10.25130/tjes.31.1.3

  • Reaction Kinetics and Mass Transfer of Photocatalytic Fenton for Phenol Degradation in a Petroleum Refinery Wastewater

    Sanarya K. Kamal, Zeyad M. Mustafa, Ammar S. Abbas

    1-11

    DOI: https://doi.org/10.25130/tjes.32.1.30

  • Purification of Biodiesel via Nanofluid using Liquid-Liquid Extraction in a Membrane Contactor

    Purification of Biodiesel

    Harith N. Mohammed, Suad H. Ahmed, Abdullah A. Abdulkarim

    54-65

    DOI: https://doi.org/10.25130/tjes.30.1.5

  • Production of Biodiesel from Caster Oil: Experimental and Optimization Study

    Shahad M. Alagha, Salih Rushdi, Zainab T. Al-Sharify, Helen Onyeaka

    251-261

    DOI: https://doi.org/10.25130/tjes.31.1.21

  • Preparation and Characterization of MgO/Fe3O4 Activated Carbon with Statistically Optimization for Oil Uptake from Emulsion

    Ataa Wejood Ali, Nawras Jameel Jassim, Mohammed N. Fares

    1-13

    DOI: https://doi.org/10.25130/tjes.32.1.27

  • PHENOL REMOVAL FROM SYNTHETIC WASTEWATER USING BATCH ADSORPTION SCHEME

    Muzher Mahdi Ibrahem Al-Doury, Maadh Hasan Alwan

    31-36

    DOI: https://doi.org/10.25130/tjes.26.3.04

  • Optimization of Batch Extraction of Aromatics from Reformed Heavy Naphtha by Response Surface Methodology

    Marwa Asad Salih, Raghad F. Almilly

    1-9

    DOI: https://doi.org/10.25130/tjes.32.1.25

  • Modelling, Optimization and Green Metrics Evaluation of Bio-Catalytic Synthesis of Biodiesel

    Rasheed U Owolabi, Mohammed A Usman, Adefunmilayo D Anuoluwapo, Onyekachi P. Oguamanam

    17-30

    DOI: https://doi.org/10.25130/tjes.27.3.03

  • Modeling Kinetics and Transport Mechanism Study of Poorly Soluble Drug Formulation in High Acidic Medium

    Maha Al-Ali, Laith I. Al-Ali

    76-91

    DOI: https://doi.org/10.25130/tjes.31.4.8

  • Modeling Horizontal Single Axis Solar Tracker Upon Sun-Earth Geometric Relationships

    Gzing Adil Mohammed, Zana Saleem Mohammed

    43-48

    DOI: https://doi.org/10.25130/tjes.29.3.5

  • Model Predictive Control of a Double Effect Evaporator Via Simulation

    Duraid Fadhil Ahmed, Ihal A. Abed

    49-63

    DOI: https://doi.org/10.25130/tjes.28.1.06

  • MnO2 Nano Particles Modified a Double Layer Cathode Reactor for an Efficient Removal of DBT in Diesel

    Maha Nazar Ismael, Ghassan H. Abdullah, Hatem Mhiri, Fatin Hassan Yahya

    44-59

    DOI: https://doi.org/10.25130/tjes.31.3.5

  • Kinetic Study of Carbon Dioxide Reaction with Binding Organic Liquids

    Sanaa Rabie Saleh, Ahmed Daham Wiheeb

    26-32

    DOI: https://doi.org/10.25130/tjes.26.1.04

  • Kinetic Analysis of Catalytic Dry Reforming of Methane Using Ni-ZrO2/MCM-41 Catalyst

    Maha Al-Ali, Alfaisal Aljbory, Ghassan H. Abdullah

    236-250

    DOI: https://doi.org/10.25130/tjes.31.1.20

  • The Improving the Thermal Performance of a Heat Exchanger using a New Passive Technology

    Manar Hameed, Harith N. Mohammed, Mohammed R. Abdullah

    66-71

    DOI: https://doi.org/10.25130/tjes.30.1.6

  • Impact of Integrating Nanoparticles with Hydrocarbon Solvent on Enhanced Heavy Oil Recovery

    Muayad M. Hasan, Firas K. Al-Zuhairi, Anfal H. Sadeq, Rana A. Azeez, Thaer Al-Jadir, Sean P. Rigby

    1-9

    DOI: https://doi.org/10.25130/tjes.32.1.16

  • Experimental Study for Enhancement of Water Flow in Horizontal Pipelines by Using Nanoparticles of Zinc Oxide and Poly Acrylic Acid

    Asmaa H. Dhiaa, Sawsan D. A. Shubbar, Fouad Kadhim Mahdi, Khaleda Abdullah Mahmoud, Abbas Ali Diwan

    212-220

    DOI: https://doi.org/10.25130/tjes.31.3.20

  • Experimental Investigation on the Fatigue Behavior on Honeycomb Sandwich Composite Panels

    Ahmed Ali Khalid , Fadhel Abbas Abdulla , Mushtaq Al-Sharify

    122-129

    DOI: https://doi.org/10.25130/tjes.30.2.13

  • Experimental Investigation of CO2 Solubility in New Amine-Based Deep Eutectic Solvents

    Mohammed N. Jassim, Thamer J. Mohammed, Abdul Mun'em Abbas Karim

    262-277

    DOI: https://doi.org/10.25130/tjes.31.1.22

  • Experimental Design of Oxidative Desulfurization of Kerosene Through Response Surface Methodology (RSM)

    Aysar Jarullah, Hamin J. Mohammed

    130-141

    DOI: https://doi.org/10.25130/tjes.30.2.14

  • Evaluation of Synthesized Pt/HY-H- Mordenite Composite Catalyst for Isomerization of Light Naphtha

    Aysar Jarullah, Abdulla M. Ahmed, Halla M. Hussein, Ahmed.N. Ahmed, Hamin J. Mohammed

    94-103

    DOI: https://doi.org/10.25130/tjes.30.1.9

  • Electrocoagulation Coupled Fenton Process for Treating Refinery Wastewater Using a Cylindrical Design of Ti and Al Electrodes

    Ahmad A. Aabid, Ibtehal K. Shakir

    19-27

    DOI: https://doi.org/10.25130/tjes.30.4.3

  • Efficient Removal of Heavy Metals from Crude Oil Using High Surface Area Adsorbent Media: Vanadium as a Case Study

    Salem J. K. Alhamd, Mehrdad Manteghian, Mohammed A. Abdulhameed, Thekra A. Ibrahim, Karar D. S. Jarmondi

    1-9

    DOI: https://doi.org/10.25130/tjes.31.2.1

  • Developing A New Empirical-Computational Method, for Accurate Acid- Base Quantitative Analysis

    Owolabi Rasheed Uthman, Akinjide Abayomi Akinola, Mohammed Awwal Usman, Abubakar Adepitan

    19-30

    DOI: https://doi.org/10.25130/tjes.26.3.03

  • Design of New Composites Nano-Catalysts for Naphtha Reforming Process: Experiments and Process Modeling

    Aysar T. Jarullah, Ahmed Nabeel Ahmed, Ban Abdulrahman Ahmed, Abdullah M. Ahmed

    46 - 59

    DOI: https://doi.org/10.25130/tjes.30.2.6

  • Design of Multivariable Control System of a Distillation Tower via Simulation Using MATLAB/Simulink

    Duraid F. Ahmed, Mohanad Y. Nawaf

    51-61

    DOI: https://doi.org/10.25130/tjes.26.3.07

  • A Review of Fluid Flow Applications and Hydraulic Performance of Sustainable Drip Irrigation to Improve Water Resource Management

    Fluid Flow Applications

    Zainab T. Al-Sharify , Huda T. Hamad , Zinah A. Alshrefy , Salwa A. Sarow, Thiab H. Nail

    59-70

    DOI: https://doi.org/10.25130/tjes.30.3.7