Control Techniques of Torque Ripple Minimization for Induction Motor
Article Sidebar
Main Article Content
Abstract
A Matlab-Simulink environment used to build a model of an Induction Motor (IM) to study and explore methods for minimizing the torque ripple. Various control strategies were reviewed and simulation studies were carried out for the following control methods: Direct Torque control, Direct Torque control with harmonic elimination, and Direct Torque control with Matrix convertor were the obtained results analyzed, evaluated, and compared to each other. The simulation results confirmed that Using Direct Torque Control with Harmonic elimination method was significantly minimized the torque ripple as the harmonics of the output voltage were canceled; discussions and conclusions were presented in this study.
Metrics
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
THIS IS AN OPEN ACCESS ARTICLE UNDER THE CC BY LICENSE http://creativecommons.org/licenses/by/4.0/
Plaudit
References
Takahashi I, Noguchi T. A new quick response and high efficiency control strategy of an induction motor. IEEE Transactions on Industry Applications 1989; IA22 (5): 820-827. DOI: https://doi.org/10.1109/TIA.1986.4504799
Lascu C, Boldea I, Blaabjerg F. A modified direct torque control for induction motor sensorless drive. IEEE Transactions on Industry Applications 2000; IA36 (1): 122-130. DOI: https://doi.org/10.1109/28.821806
Huangang W, Wenli X, Geng Y, Jian L. Variable structure torque control of induction motor using space vector modulation. Electrical Engineering 2005; 87(2): 93-102. DOI: https://doi.org/10.1007/s00202-003-0224-0
Venkata G, Panda A. Torque ripple reduction in direct controlled induction motor drive using fuzzy logic. National Institute of Technology Rourkela 2007.
Rajendran R, Devarajan N. Simulation and implementation of a high performance torque control scheme of induction motor. International Journal of Electrical and Computer Engineering 2012; 2(3): 277-284. DOI: https://doi.org/10.11591/ijece.v2i3.208
Kumar V, Bansal RC, Joshi RR. Experimental realization of matrix converter based induction motor. International Journal of Control, Automation, and Systems 2008; 6(5): 670-676.
Antar RK, Allu AA. Sensorless speed/torque control of DC machine using artificial neural network technique. Tikrit Journal of Engineering Sciences 2016; 23(3): 55-62. DOI: https://doi.org/10.25130/tjes.23.3.06
Abdelelah KM, Fatah AA. Real time speed control of DC motor by programming the fuzzy controller in C language. Tikrit Journal of Engineering Sciences 2016; 23(3): 91-95. DOI: https://doi.org/10.25130/tjes.23.3.10
Youns YM, Hassan OM. Performances analysis of SPWM inverter-fed three phase induction motor during fault conditions. Tikrit Journal of Engineering Sciences 2016; 23(3): 55-62.
Boldea I, Nasar S. The induction machine handbook. 2002, CRC press.
Ozkop E. Direct torque control of induction motor using space vector modulation.12th International Power System Conference 2008; 12-15 May: pp. 368-372. DOI: https://doi.org/10.1109/MEPCON.2008.4562350
Bowes SR. Novel space vector based harmonic elimination inverter control. IEEE Transactions on Industry applications 2000; 36(2): 549-557. DOI: https://doi.org/10.1109/28.833773
Odaka A. High efficiency power conversion using a matrix convertor. Fuji Electric Review 2004; 50(3): 94-98.
Matlab user manual, Math works Inc., 2014.
Simulink user manual, Math works Inc., 2014.