Bearing Capacity of Eccentrically Loaded Strip Footing Near The Edge of Cohesive Slope
الشريط الجانبي للمقالة
محتوى المقالة الرئيسي
الملخص
The finite element method is used to investigate the behavior of a strip footing constructed near the edge of a sloping cohesive ground. The effects of variation in footing closeness, loading eccentricity and slope angle are studied also. It is proved that Bowles method overestimates the load carrying capacity of the concentrically loaded strip footings on cohesive soils. Decreasing the distance between the footing and the slope edge, increasing the eccentricity and slope angle reduce the ultimate bearing capacity. Slope effect diminishes as the footing distance from the edge approaches (1.5) times its width.
المقاييس
تفاصيل المقالة
هذا العمل مرخص بموجب Creative Commons Attribution 4.0 International License.
THIS IS AN OPEN ACCESS ARTICLE UNDER THE CC BY LICENSE http://creativecommons.org/licenses/by/4.0/
##plugins.generic.plaudit.displayName##
المراجع
Meyerhof, G.G., (1953), ” The Bearing Capacity of Foundations Under Eccentric and Inclined Loads “, Proc. 3rdInt. Conf. on Soil Mech. and Foundation Engineering, I, pp.(440-445).
Meyerhof, G.G., (1957), ” The Ultimate Bearing Capacity of Foundations on Slopes “, Proc. 4th Int. Conf. on Soil Mech. and Foundation Engineering, I, pp.(384-386).
Bowles, J.E., (1988), ” Foundation Analysis and Design “, 4thed., McGraw-Hill Book Company, (1004)pp.
Griffiths, D.V., (1982), ” Computation of Bearing Capacity Factors Using The Finite Elements “, Geotechnique, Vol. 32, No. 3, pp.(195-202). DOI: https://doi.org/10.1680/geot.1982.32.3.195
Winter, G. and Nilson, A.H., (1979), ” Design of Concrete Structures “, McGraw- Hill Book Company, (647)pp.
Bathe, K.J., (1996), ” Finite Element Procedure “, Prentice- Hall International, Inc.,(1037)pp.
Smith, I.M. and Griffiths, D.V., (1998), ” Programming The Finite Element Method “, John Wiley & Sons, (534)pp.
Al-Jubair, H.S., (2004), ” The Effect of Rigidity of Eccentrically Loaded Footings on The Load Carrying Capacity “, Engineering & Technology Journal, Vol. 23, No.12, pp.(790-798).