Characterizing the Mechanical Performance of Laser Welded Lap Transverse Fillet Joints of Thick AISI 316L Stainless Steel
الشريط الجانبي للمقالة
محتوى المقالة الرئيسي
الملخص
Fillet and double fillet welding are extensively used in numerous structural applications around the globe. Laser welding technology has achieved great appeal due to its superior quality, accuracy, speed, adaptability, and versatility. The present investigation examines two modes of transverse welding, namely single fillet and double fillet weldments, on austenitic 316L stainless steel sheets with a thickness of 3 mm. The welding was performed using a CO2 laser, eliminating the need for filler material. The mechanical performance was evaluated through tensile shear, bending, and micro-hardness tests. The investigation revealed a notable correlation between the laser power and scanning speed as working parameters on the joint's strength. The analytical results indicated that the optimal working parameters were a laser power of 2.75 kW and a scanning speed of 5 mm/s. These parameters resulted in a yield strength of 186.98 MPa and 275.91 MPa for the single fillet joints and double fillet joints, respectively. The three-point bending test showed flexural yield strength of 328.73 MPa and 893.57 MPa for the single and double fillets, respectively. The area under the flexural stress-strain curve reveals high ductility for both joining modes, represented by the broad area under the curve. This refers to the energy consumed per unit volume required to bend and deform the weldment until fracture.
المقاييس
تفاصيل المقالة
هذا العمل مرخص بموجب Creative Commons Attribution 4.0 International License.
THIS IS AN OPEN ACCESS ARTICLE UNDER THE CC BY LICENSE http://creativecommons.org/licenses/by/4.0/
##plugins.generic.plaudit.displayName##
المراجع
Mazumder J. Laser Welding: State of the Art Review. Journal of Metals 1982; 34(7):16-24. DOI: https://doi.org/10.1007/BF03338045
Unt A, Poutiainen I, Grünenwald S, Sokolov M, Salminen A. High Power Fiber Laser Welding of Single Sided T-Joint on Shipbuilding Steel with Different Processing Setups. Applied Sciences 2017; 7(12):1276. DOI: https://doi.org/10.3390/app7121276
Sirohi S, Pandey SM, Tiwari V, Bhatt D, Fydrych D, Pandey C. Impact of Laser Beam Welding on Mechanical Behaviour of 2.25Cr-1Mo (P22) Steel. International Journal of Pressure Vessels and Piping 2023; 201:104867. DOI: https://doi.org/10.1016/j.ijpvp.2022.104867
Kumar A, Pandey C. Autogenous Laser-Welded Dissimilar Joint of Ferritic/Martensitic P92 Steel and Inconel 617 Alloy: Mechanism, Microstructure, and Mechanical Properties. Archives of Civil and Mechanical Engineering 2022; 22(1):39. DOI: https://doi.org/10.1007/s43452-021-00365-6
Guo C, Singh SC. Handbook of Laser Technology and Applications. 2nd ed. Boca Raton: CRC Press; 2021.
Cheepu M, Kumar Reddy YA, Indumathi S, Venkateswarlu D. Laser Welding of Dissimilar Alloys Between High Tensile Steel and Inconel Alloy for High Temperature Applications. Advanced Materials and Processing Technology 2022; 8(2):1197-1208. DOI: https://doi.org/10.1080/2374068X.2020.1855389
Cheng Y, Jin X, Li S, Zeng L. Fresnel Absorption and Inverse Bremsstrahlung Absorption in an Actual 3D Keyhole During Deep Penetration CO2 Laser Welding of Aluminum 6016. Optics and Laser Technology 2012; 44(5):1426-1436. DOI: https://doi.org/10.1016/j.optlastec.2011.12.024
Steen WM, Mazumder J. Laser Material Processing. London: Springer London; 2010. DOI: https://doi.org/10.1007/978-1-84996-062-5
Ayoola WA, Suder WJ, Williams SW. Parameters Controlling Weld Bead Profile in Conduction Laser Welding. Journal of Materials Processing Technology 2017; 249:522-530. DOI: https://doi.org/10.1016/j.jmatprotec.2017.06.026
Prabakaran MP, Kannan GR, Pandiyarajan R. Effects of Welding Speed on Microstructure and Mechanical Properties of CO2 Laser Welded Dissimilar Butt Joints Between Low Carbon Steel and Austenitic Stainless Steel. Advanced Materials and Processing Technology 2022; 8(sup1):1-12. DOI: https://doi.org/10.1080/2374068X.2020.1855960
Indhu R, Divya S, Tak M, Soundarapandian S. Microstructure Development in Pulsed Laser Welding of Dual Phase Steel to Aluminium Alloy. Procedia Manufacturing 2018; 26:495-502. DOI: https://doi.org/10.1016/j.promfg.2018.07.058
Assuncao E, Williams S. Comparison of Continuous Wave and Pulsed Wave Laser Welding Effects. Optics and Lasers in Engineering 2013; 51(6):674-680. DOI: https://doi.org/10.1016/j.optlaseng.2013.01.007
Dawes C. Laser Welding. Woodhead Publishing Limited; 1992. DOI: https://doi.org/10.1533/9781845698843
Fuerschbach PW, Eisler GR. Effect of Laser Spot Weld Energy and Duration on Melting and Absorption. Science and Technology of Welding and Joining 2002; 7(4):241-246. DOI: https://doi.org/10.1179/136217102225004293
Coroado J, Ganguly S, Williams S, Suder W, Meco S, Pardal G. Comparison of Continuous and Pulsed Wave Lasers in Keyhole Welding of Stainless-Steel to Aluminium. International Journal of Advanced Manufacturing Technology 2022; 119(1-2):367-387. DOI: https://doi.org/10.1007/s00170-021-08226-5
Meco S, Cozzolino L, Ganguly S, Williams S, McPherson N. Laser Welding of Steel to Aluminium: Thermal Modelling and Joint Strength Analysis. Journal of Materials Processing Technology 2017; 247:121-133. DOI: https://doi.org/10.1016/j.jmatprotec.2017.04.002
Suder WJ, Williams S. Power Factor Model for Selection of Welding Parameters in CW Laser Welding. Optics and Laser Technology 2014; 56:223-229. DOI: https://doi.org/10.1016/j.optlastec.2013.08.016
Coroado J, Meco S, Williams S, Ganguly S, Suder W, Quintino L. Fundamental Understanding of the Interaction of Continuous Wave Laser with Aluminium. International Journal of Advanced Manufacturing Technology 2017; 93(9-12):3165-3174. DOI: https://doi.org/10.1007/s00170-017-0702-6
Drawing Practices. 2009; 1994.
Groover M. Fundamentals of Modern Manufacturing Materials, Processes and Systems. John Wiley & Sons; 2010:493.
McCormac JC, Csernak SF. Structural Steel Design. 5th ed. 2006:1-738.
Miller DKD. Designing Welded Lap Joints Practical Ideas for the Design Professional. 2001; 18(3):3-5.
Jeffus L. Welding: Principles and Applications. Cengage Learning; 2012:947.
Ishak M, Salleh MNM. Double Fillet Lap of Laser Welding of Thin Sheet AZ31B Mg Alloy. Journal of Physics: Conference Series 2018; 1027(1):12003. DOI: https://doi.org/10.1088/1742-6596/1027/1/012003
Tawfiq TA, Taha ZA, Furat, Hussein I, Shehab AA. Spot Welding of Dissimilar Metals Using an Automated Nd:YAG Laser System. Iraqi Journal of Laser, Part A 2012; 11:1-5.
Roos C, Schmidt M. Remote Laser Welding of Zinc Coated Steel Sheets in an Edge Lap Configuration with Zero Gap. Physics Procedia 2014; 56:535-544. DOI: https://doi.org/10.1016/j.phpro.2014.08.025
Khan MMA, Romoli L, Fiaschi M, Dini G, Sarri F. Laser Beam Welding of Dissimilar Stainless Steels in a Fillet Joint Configuration. Journal of Materials Processing Technology 2012; 212(4):856-867. DOI: https://doi.org/10.1016/j.jmatprotec.2011.11.011
Unt A, Salminen A. Effect of Welding Parameters and the Heat Input on Weld Bead Profile of Laser Welded T-Joint in Structural Steel. Journal of Laser Applications 2015; 27(S2). DOI: https://doi.org/10.2351/1.4906378
Wahab A, Khuder H, Ebraheam EJ. Study the Factors Effecting on Welding Joint of Dissimilar Metals. Al-Khwarizmi Engineering Journal 2011; 7(1):76-81.
Bhanu V, Gupta A, Pandey C. Role of A-TIG Process in Joining of Martensitic and Austenitic Steels for Ultra-Supercritical Power Plants - A State of the Art Review. Nuclear Engineering and Technology 2022; 54(8):2755-2770. DOI: https://doi.org/10.1016/j.net.2022.03.003
Dak G, Pandey C. Study on Effect of Weld Groove Geometry on Mechanical Behavior and Residual Stresses Variation in Dissimilar Welds of P92/SS304L Steel for USC Boilers. Archives of Civil and Mechanical Engineering 2022; 22(3): 140. DOI: https://doi.org/10.1007/s43452-022-00468-8
Rajesh KVD, Shaik AM, Buddi T. Wear and Corrosion Analysis on Maraging Steel MS1 and Stainless Steel 316L Developed by Direct Metal Laser Sintering Process. Advanced Materials and Processing Technology 2022; 8(sup3):1135-1150. DOI: https://doi.org/10.1080/2374068X.2021.1930797
McGuire MF. Stainless Steels for Design Engineers. ASM International, Materials Park, OH; 2008. DOI: https://doi.org/10.31399/asm.tb.ssde.9781627082860
Standard Test Method for Guided Bend Test for Ductility of Welds. 2006; 92(Reapproved 2003):5-8.
Das U, Das R, Toppo V, Muthukumaran S. Experimental Study on Tensile and Bending Behavior of Friction Stir Welded Butt Joints of Dissimilar Aluminum Alloys. Materials Today: Proceedings 2019; 18:4717-4723. DOI: https://doi.org/10.1016/j.matpr.2019.07.458
American Society of Mechanical Engineers. Standard Test Methods for Bend Testing of Material for Ductility E290-14. 2044:1-10.
Ismail AH. Experimental and Analytical Study of Bending Stresses and Deflections in Curved Beam Made of Laminated Composite Material. Al-Khwarizmi Engineering Journal 2014; 10(4):21-32.
Obeidi MA, McCarthy E, Kailas L, Brabazon D. Laser Surface Texturing of Stainless Steel 316L Cylindrical Pins for Interference Fit Applications. Journal of Materials Processing Technology 2018; 252:58-68. DOI: https://doi.org/10.1016/j.jmatprotec.2017.09.016
Dak G, Sirohi S, Pandey C. Study on Microstructure and Mechanical Behavior Relationship for Laser-Welded Dissimilar Joint of P92 Martensitic and 304L Austenitic Steel. International Journal of Pressure Vessels and Piping 2022; 196:104629. DOI: https://doi.org/10.1016/j.ijpvp.2022.104629
Sirohi S, Gupta A, Pandey C, Vidyarthy RS, Guguloth K, Natu H. Investigation of the Microstructure and Mechanical Properties of the Laser Welded Joint of P22 and P91 Steel. Optics and Laser Technology 2022; 147:107610. DOI: https://doi.org/10.1016/j.optlastec.2021.107610
Sun FZ, Li Y, Tan WD, Pang M. Effect of Laser Scanning Speed on the Thermal-Mechanical Coupling Field of Laser Remelting of Valve Seat. Optik 2021; 225:165776. DOI: https://doi.org/10.1016/j.ijleo.2020.165776