Numerical Validation on The Performance of A Two Dimensional Curved Diffuser
Main Article Content
Abstract
This paper deals with the investigation of the characteristic of subsonic viscous flow through a curved diffuser numerically with commercial code for computational fluid dynamics (CFD) Fluent Inc. version 6.3. The diffuser flow is a two-dimensional, turbulent, incompressible and fully developed. The investigations are based on the Spalart-Allmaras turbulent model. A 2-D quadrilateral grid is generated by the grid generator GAMBIT. Obtained results are compared with the available experimental data and found to give good agreement. The effects of curvature angle, area ratio and adding tail channel with constant area on the diffuser performance and flow pattern are studied and revealed by the pressure contour, velocity vector, and variation of the pressure recovery factor for all above mentioned parameters.
Metrics
Article Details

This work is licensed under a Creative Commons Attribution 4.0 International License.
THIS IS AN OPEN ACCESS ARTICLE UNDER THE CC BY LICENSE http://creativecommons.org/licenses/by/4.0/
Plaudit
References
T. D. Bello, V. Deppold, and N. J. Georgiadis “Computational Study of Separating Flow in a Planar Subsonic Diffuser” NASA/TM- 2005-213894.
W. L. Zhang, D. D. Knight, and D. Smith “Automated Design of a Three- Dimensional Subsonic Diffuser” J. Propulsion and Power, Vol. 16, No. 6, November-December 2000. DOI: https://doi.org/10.2514/2.5688
H. Sprenger, “Experimental investigation of straight and curved diffusers” Mitt. Inst. Aerodyne. Zurich (27)88pp., May 1962.
B. Majumdar and B. Agrawal “Flow Characteristics in Large Area Ratio Curved Diffuser” J. Aerospace engineering 210(G1):55-75, 1996. DOI: https://doi.org/10.1243/PIME_PROC_1996_210_345_02
S. N. Singh, D. P. Agrawal, R. Mohan, and B. Majumdar “Experimental Study of Flow High Aspect Ratio 900 Curved Diffuser” J. Fluid Engineering Vol. 120 pp. 83-89, 1998 DOI: https://doi.org/10.1115/1.2819668
Y. D. Choi, H. Lacovides, and B. E. Launder “Numerical Computation of Turbulent Flow in a Square Section 1800 Bend” J. Fluid Engineering Vol.111 pp.59-67 March 1989. DOI: https://doi.org/10.1115/1.3243600
S. Chang, M. Humphrey, J. A. C, and Modavi “Turbulent Flow through 1800 Bend” Karlsruhe pp.620-625, 1983.
Al-Annaz, Ammar H. S. “Experimental study on the Performance of Two-Dimensional Curved Diffuser” MSc. Thesis, University of Tikrit 2003.
Fluent 6.3 Documents, Fluent Inc. 2006 from the help of program in the CD of Fluent.
P. Spalart and S. Allmaras. A oneequation turbulence model for aerodynamic flows. Technical Report AIAA-92-0439, American Institute of Aeronautics and Astronautics, 1992. DOI: https://doi.org/10.2514/6.1992-439