Study the Effect of Temperature, Resistors, and Absorption Layer CNTS on Cell Performance Using SCAPS
Article Sidebar
Main Article Content
Abstract
The ZnO/CdS/CNTS solar cell was simulated using the SCAPS program. It was found that increasing the concentration of the accepter and the thickness of the absorber layer increased (ɳ, Voc) and decreased (FF). The best concentration was 1.0×12 cm-3, and the best thickness was (2.5µm). Increasing the lift time of minority carriers increased (ɳ, FF, Jsc) and decreased (Voc). Adding a back-reflection layer (BSF) increased the conversion efficiency from 14.07 % to 15.15%. The effect of increasing the acceptor concentration in the reflection layer was similar to the absorption layer; however, increasing the thickness was opposite to the absorption layer, meaning it increases (FF) and decreases (ɳ, Voc). The results showed that increasing the shunt resistance increased (ɳ, FF, Voc), while increasing the series resistance decreased (ɳ, FF, Voc), and increasing the temperature reduced (ɳ, Voc, Jsc) and increased (FF).
Article Details
Section
This work is licensed under a Creative Commons Attribution 4.0 International License.
THIS IS AN OPEN ACCESS ARTICLE UNDER THE CC BY LICENSE http://creativecommons.org/licenses/by/4.0/
References
Chen R. First-Principles Study on Electronic and Optical Properties of Copper-Based Chalcogenide Photovoltaic Materials. Ph.D. Thesis. KTH Royal Institute of Technology; Sweden: 2017.
Ibrahim HK, Sabaawi AMA, Aljwari QT. A Comprehensive Study on the Effect of Defects on Perovskite Solar Cell Performance. Preprints 2023; 1: 2023060344, (1-12).
Yablonovitch E, Miller OD, Kurtz SR. The Opto-Electronic Physics that Broke the Efficiency Limit in Solar Cells. 38th IEEE Photovoltaic Specialists Conference 2012; Austin, TX, USA. IEEE: p. 001556-001559.
Simya OK, Mahaboobbatcha A, Balachander K. A Comparative Study on the Performance of Kesterite Based Thin Film Solar Cells Using SCAPS Simulation Program. Superlattices and Microstructures 2015; 82: 248-261.
Simya O K, Selvam M, Karthik A, Rajendran V. Dye-sensitized Solar Cells Based on Visible-Light-Active TiO2 Heterojunction Nanoparticles. Synthetic Metals 2014; 188: 124-129.
Omrani MK, Minbashi M, Memarian N, Kim DH. Improve the Performance of CZTSSe Solar Cells by Applying a SnS BSF Layer. Solid-State Electronics 2018; 141: 50-57.
Rondiya S, Wadnerkar N, Jadhav Y, Jadkar S, Haram S, Kabir M. Structural, Electronic, and Optical Properties of Cu2NiSnS4: A Combined Experimental and Theoretical Study Toward Photovoltaic Applications. Chemistry of Materials 2017; 29(7):3133-3142.
Chen HJ, Fu SW, Tsai TC, Shih CF. Quaternary Cu2NiSnS4 thin Films as a Solar Material Prepared Through Electrodeposition. Materials Letters 2016; 166: 215-218.
Yang C L, Chen YH, Lin M, Wu SL, Li L, Liu WC, Zhang FM. Structural, Optical and Magnetic Properties of Cu2NiSnS4 Thin Films Deposited by Facile One-Step Electrodeposition. Materials Letters 2016; 166: 101-104.
Ghosh A, Chaudhary DK, Biswas A, Thangavel R, Udayabhanu G. Solution-Processed Cu2XSnS 4 (X= Fe, Co, Ni) Photo-Electrochemical and Thin Film Solar Cells on Vertically Grown ZnO Nanorod Arrays. RSC Advances 2016; 6(116): 115204-115212.
Mokurala K, Mallick S, Bhargava P, Siol S, Klein TR, Van Hest MF. Influence of Dipping Cycles on Physical, Optical, and Electrical Properties of Cu2NiSnS4: Direct Solution Dip Coating for Photovoltaic Applications. Journal of Alloys and Compounds 2017; 725: 510-518.
Khattak YH, Baig F, Ullah S, Marí B, Beg S, Khan K. Effect of Cu2O Hole Transport Layer and Improved Minority Carrier Life Time on the Efficiency Enhancement of Cu2NiSnS4 Based Experimental Solar Cell. Journal of Renewable and Sustainable Energy 2018; 10(4): 043502, (1-12).
Chihi A, Boujmil MF, Bessais B. Synthesis and Characterization of Photoactive Material Cu2NiSnS4 Thin Films. Journal of Materials Science: Materials in Electronics 2019; 30: 3338-3348.
Wang TX, Li YG, Liu HR, Li H, Chen SX. Flower-like Cu2NiSnS4 Nanoparticles Synthesized by a Facile Solvothermal Method. Materials Letters 2014; 124: 148-150.
Ganvir R. Modelling of the Nanowire CdS-CdTe Device Design for Enhanced Quantum Efficiency in Window-Absorber Type Solar Cells. Ph.D Thesis. University of Kentucky; USA: 2016.
Skhouni O, El Manouni A, Mari B, Ullah H. Numerical Study of the Influence of ZnTe Thickness on CdS/ZnTe Solar Cell Performance. The European Physical Journal Applied Physics 2016; 74(2): 24602, (1-6).
Michaelson HB. The Work Function of the Elements and its Periodicity. Journal of Applied Physics 1977; 48(11): 4729-4733.
Omrani MK, Minbashi M, Memarian N, Kim DH. Improve the Performance of CZTSSe Solar Cells by Applying a SnS BSF Layer. Solid-State Electronics 2018; 141:50-57.
Shoewu O, Anuforonini G, Duduyemi O. Simulation of the Performance of CdTe/CdS/ZnO Multi-Junction Thin Film Solar Cell. Review of Information Engineering and Applications 2016; 3(1): 1-10.
Mukhopadhyay K, Fermi Hilbert Inbaraj P, Joseph Prince J. Thickness Optimization of CdS/ZnO Hybrid Buffer Layer in CZTSe Thin Film Solar Cells Using SCAPS Simulation Program. Materials Research Innovations 2019; 23(6): 319-329.
Rondiya S, Wadnerkar N, Jadhav Y, Jadkar S, Haram S, Kabir M. Structural, Electronic, and Optical Properties of Cu2NiSnS4: A Combined Experimental and Theoretical Study Toward Photovoltaic Applications. Chemistry of Materials 2017; 29(7): 3133-3142.
Jariwala A, Chaudhuri TK, Patel S, Toshniwal A, Kheraj V, Ray A. Direct-Coated Copper Nickel Tin Sulphide (Cu2NiSnS4) Thin Films from Molecular Ink. Materials Letters 2018; 215: 118-120.
Jhuma FA, Shaily MZ, Rashid MJ. Towards High-Efficiency CZTS Solar Cell Through Buffer Layer Optimization. Materials for Renewable and Sustainable Energy 2019; 8: 1-7.
Khattak YH, Baig F, Ullah S, Marí B, Beg S, Ullah H. Enhancement of the Conversion Efficiency of Thin Film Kesterite Solar Cell. Journal of Renewable and Sustainable Energy 2018; 10: 033501, (1-14).
Tress W, Leo K, Riede M. Optimum Mobility, Contact Properties, and Open-Circuit Voltage of Organic Solar Cells: A Drift-Diffusion Simulation Study. Physical Review B 2012; 85(15): 155201, (1-11).
Burgelman M, Decock K, Niemegeers A, Verschraegen J, Degrave S. SCAPS Manual. University of Ghent, Belgium,2016.
Floyd T. Electronic Devices: Conventional Current Version. 8th ed., India: Pearson Prentice Hall; 2008.
Wen H, Cai H, Du, Y, Dai X, Sun Y, Ni J, Zhang J. Improving the Organic/Si Heterojunction Hybrid Solar Cell Property by Optimizing PEDOT: PSS Film and with Amorphous Silicon as a Back Surface Field. Applied Physics A 2017; 123: 1-9.
Spies A, Reinhardt J, List M, Zimmermann B, Würfel U. (2017). Impact of Charge Carrier Mobility and Electrode Selectivity on the Performance of Organic Solar Cells. In: Leo, K. (eds) Elementary Processes in Organic Photovoltaics. Advances in Polymer Science, vol 272. Springer, Cham.
Samhi S. The Effectiveness of the Performance of Photovoltaic Solar Cells in Ouargla and the Effect of the Intensity of Solar Radiation and Climatic Factors on It. Ph.D Thesis. University of Kasdi Merbah Ouargla; Ouargla, Algeria: 2016.
Martin A. Crane (Solar Cells Work Principles, Technology, and System Applications) translated by Dr. Yusuf Mouloud Hassan, Ministry of Higher Education and Scientific Research, University of Mosul, 1989.
Kitai A. Principles of Solar Cells, LEDs and Diodes: The Role of the PN Junction. 1st ed., UK: John Wiley & Sons; 2011. ¬