Tikrit Journal of Engineering Sciences

The Tikrit Journal of Engineering Sciences is not limited to a specific aspect of science and engineering but is instead devoted to a wide range of subfields in the engineering sciences. While it encourages a broad spectrum of contribution in the engineering sciences, its core interest lies in issues concerning material modeling and response. Articles of interdisciplinary nature are particularly welcome.

The Tikrit Journal of Engineering Sciences was originally published as in 1994 with a one issue per year, it had basic requirements and sources. Tikrit Journal of Engineering Sciences issued 2 issues in 1999 and started in 4 issues per year since 2004.

Editor Prof. Dr. Aziz Ibrahim Abdulla, Civil Engineering, Tikrit University, Iraq E-mail: aziz@tj-es.com ; lan914@gmail.com Phone: 009647708450730

Journal Homepage Image



TJES Published a New Issue

Tikrit Journal of Engineering Science (TJES) has just published its latest
issue at http://www.tj-es.com/index.php/tjes. We invite you to review the
Table of Contents here and then visit our web site to review articles and
items of interest.

Vol 22, No 1 (2015): Tikrit Journal of Engineering Science (TJES)
Table of Contents
Posted: 2015-04-14
More Announcements...

Vol 24, No 2 (2017): Tikrit Journal of Engineering Science (TJES)

Table of Contents

Civil Engineering

Statistical Study to Check the Conformity of Aggregate in Kirkuk City to Requirement of Iraqi Specification
Ammar Saleem Khazaal, Nizar N Ismeel, Abdel fattah K. Hussein 11-27
Sand Dune Stabilization by Hydrated Lime
Nadia Salim Esmaeil, Hamid H. Hussein, Fayzh I. Mohammed 35-43
Measurement and Improvement the Quality of the Compressive Strength of Product Concrete
Zohair Hassan Abdullah, Thamir K. Salim 68-76

Mechanical Engineering

Experimental Study of the Effect for Water Depth on the Mass Transfer of Passive Solar Still Chemical Solutions
Fayadh M. Abed, Dalaf S. mahmood 1-10
Effect of Pressing Pressure on properties of Copper–10% Graphite Composites Prepared by Powder Metallurgy Technique
Hashim Shukur Humood 28-34
Effect of hydrodynamic action in peristaltic pump of blood gases analyzer ABL 555
Ali K. Mohammed 51-60
Preparing Composite Materials from Commercially Pure Aluminum Scrap and Reinforced with Iraqi Sand
Mohammad Abdullatif Ahmad 61-67
Experimental Study for Some of the Mechanical and Physical Properties for the Binary Polymer of (Epoxy resin - Polyurethane)
Adnan R. Ahmed, Saif S. Irhayyim, Muaeed F. Abdulmajeed 86-93
Studying the Effect of Roughness of Wet Road on Critical speed of Vehicle
Ali K. Mohammed, Ibraheem A. Mahusin, Omer K. Ahmed 102-110

Environmental Engineering

Cu II Removal from Industrial Wastewater Using Low Cost Adsorbent
Salwa Hadi Ahmed 44-50
Noise Isolation Capability for a Range of Construction Materials Used In Iraq
Kossay K. Al-Ahmady, Muthana K. Mohammad 77-85
Spatial Analysis of the Solid Waste Bins in the Sectors of the City of Mosul "Environmental Study in Geographic Information Systems"
Zainab A. Khalaf 94-101

ISSN(s) : 1813-162X (print) , 2312-7589 (online)